Zhangjiagang Zhong Lai Machinery Co.,Ltd.

All
  • All
  • Title
Home> Blog> Infineon i6 dual-core detailed line swipe brush the whole process! Finally solved the problem of upgrade failure

Infineon i6 dual-core detailed line swipe brush the whole process! Finally solved the problem of upgrade failure

September 03, 2021
As we all know, before the Infinico i6 dual-core can not brush, this is a brick, there is no way. Afterwards, the short-circuit card swiping tutorial was dumped, but because it was difficult to short-circuit into recovery, the success rate was not high, causing the card brush to become a bottleneck.
Later began line brush research, Brush software found, drive installed, the computer also identified, but that is not to find a suitable drop line brush package, once went to other forums to find other flat drop package, replace, brush, later Failed.
Until later, Taobao finally came out with a line brush pack, and the jars were also shared by @Dai Long 100 million. They immediately evaluated it, but they stuck at 69% of the progress bar. Then they failed and became red. Someone evaluated, the evaluation was successful, and notices were issued, saying that all usbs were removed, including the mouse. But at the time, it was thought that only the wireless mouse should have no effect, and it would be re-flashed, or the card would be 69%. It didn't matter if it did not succeed, instead it drove the recovery completely. Can't pass the recovery card swipe, nor can it be upgraded by ota push. It has been in version 2.04 and cannot be upgraded.
I have posted several times and later found out that I was dropping one case. Enthusiastic dripping mode master stone so I take the initiative to add buckle, and analyze the problem with me, and finally to the stone engineer plus me, get a few times to engage in remote, but also replace the brush for recovery, or can not succeed ota. Finally, engineers could not find a reason. Thanks to the stone development team, the big gods are eager to solve the user's drop problem. Then read the post reply, said that without usb can line brush success, then change to remote control, mobile phone remote control computer operation brush, get rid of usb drop interference, and then miraculously brushed 69%, to 76% card for a small meeting Passed, green, and successful, the line brush tutorial is not detailed,



Contact Us

Author:

Mr. Nathan Mong

Phone/WhatsApp:

+8613921976437

Popular Products
You may also like
Related Information
New Laminated Honeycomb Paper Core Production Line

We are professional manufacturer engaged in consulting, designing, manufacturing, and selling cellular machinery equipment. While providing users with machinery equipment with high quality, low...

Instruction manual of rat acid phosphatase (ACP) ELISA kit

Instruction manual of rat acid phosphatase (ACP) ELISA kit This kit is for research use only. Drug Name: Generic Name: Rat Acid Phosphatase (ACP) ELISA Kit purpose of usage: This kit is used to...

How to use and develop S11 coil core transformer

Development, Manufacture and Application of S11 Volume Core Transformer Abstract: To reduce the loss of transformers and improve the efficiency of power supply and distribution systems is a problem...

Advantech's latest ACP-432019 inch 4U rackmount chassis

Advantech has introduced the ACP-4320, a 19-inch 4U rackmount chassis. The chassis supports up to 1TB of storage capacity and provides an intelligent management module for applications where data...

Related Categories

Email to this supplier

Subject:
Email:
Message:

Your message must be betwwen 20-8000 characters

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send